Tri-Clamp 1.5" Pressure Gauge Vertical 0-4 Bar
Tri-Clamp 1.5" Pressure Gauge Vertical 0-4 Bar
In stock
- Delivery time: 2-5 Workdays
Couldn't load pickup availability
SKU:
SKU:EMM24895
Product Description
A Tri-Clamp pressure gauge with integrated pressure diaphragm on the Tri-Clamp side. The fluid being measured is isolated from the interior of the manometer. The analogue gauge is in bar and PSI. The gauge is filled with glycerin for longevity and a stable reading.
These are often installed on fermentation tanks to monitor pressure.
Specifications:
- Tri-Clamp 1.5" = 50.5mm
- Material: 1.4301 Stainless Steel
- Accuracy: Class 2.5 (±0.1 bar)
- Filling fluid: Glycerine (technical grade, not food-safe)
- Overall Length: 105 mm
- Dial Face Diameter: 68 mm
Note: This product falls under Article 4(3) of Directive 2014/68/EU (Pressure Equipment Directive) and is manufactured in accordance with good engineering practice (GEP). CE marking is not required.
Manufacturer: Craft Hardware, Kreuzeckstr 9a 86163 Augsburg, https://www.crafthardware.de/
⚠️ Safety Information
- After installation, the tip of the blue silicone plug must be cut off to allow pressure equalization (see the printing on the plug).
- The manometer must not be opened, and the blue plug must not be removed — doing so would cause the fill fluid to leak out and permanently disable the manometer.
- If you notice leaking fluid, or if the needle no longer responds to pressure, or the fill fluid appears cloudy or discolored, discontinue use and contact us for a replacement.
- We recommend mounting the manometer so that, in the unlikely event of a defect, any leaking fluid cannot drip directly into your product.
- Occasionally checking the fluid level and clarity through the viewing window helps catch potential issues early.