Ball Valve 3-Way T-bore Tri-Clamp DN 15 (34 mm)

This 3-way ball valve is T-drilled and the ball rotates 360 degrees allowing a number of operating positions. Please make sure the available positions are suitable for your application. With a 3-way T Valve there may be no fully closed position, depending on your connections. Please consider your application carefully and determine if an L-Valve would work better. Also, make sure you have enough clearance to rotate the handle all the way around; some fittings may obstruct and prevent normal operation. 

Specifications:

• Length 96 mm
• Inner Diameter 16mm (Nominal DN15)
• Tri-Clamp Size 34 mm
• Wrench Size: 19 mm
• Gaskets: PTFE

The three way valves are sealed and pressure checked at the factory. They are not intended to be disassembled for cleaning as they can be very difficult to properly re-seal. For proper cleaning a manual brush or CIP method should be employed.