Heating Element 5.2 kw Tri-Clamp Version

Our 5.2 kW ripple heating element will increase your heating ramp rate and maintain a relatively low watt density of 13 w/cm2. If you will be using this to boil your wort, make sure you have a controller capable of reducing the power input. 5kW is borderline too much power for soft rolling boil with a 40L batch.

• Voltage 230V
• Current 22A
• Power 5200W
• Power Density 13 w/cm2
• Stainless tube with 8mm diameter
• 35.5cm long (34.5 cm from face of Tri-Clamp adapter to tip of element)
• 1" BSP threads
• 1.5" Tri Clamp BSP adapter included

Sold with an PG21  cable gland that has a clamping range of 13-18 mm.

The element consumes approximately 22 amps and cannot be used with the standard 16 amp household circuit. Check with your local electrician to see if your utility allows high amperage on a single phase because of unbalanced loads!

Important: please consult a professional electrician regarding the installation of your heating element. You must be sure to use an appropriate GFI outlet and circuit breaker sized for the load.