Pressure Relief Valve with Vacuum Breaker, 1.5" Tri-Clamp
Pressure Relief Valve with Vacuum Breaker, 1.5" Tri-Clamp
In stock
- Delivery time: 2-5 Workdays
Couldn't load pickup availability
SKU:
SKU:EFK24186
Product Description
A compact 1.5" Tri-Clamp pressure relief valve and vacuum breaker. Releases pressure at the selected upper pressure rating and breaks a vacuum at -1.5 PSI (approx. -0.1 bar).
The valve can be very slightly adjusted with a hex wrench to maintain a release at the rated pressure, in case the release pressure drifts over time. However, significant pressure adjustments are not possible, so be sure to choose the right pressure range for your vessel or application.
- Pressure range: -0.1 - approx. 1.0 bar or -0.1 - approx. 2.0 bar
- Height 71 mm
- Body diameter 41mm
- Material 1.4301
- Tri-Clamp flange size 50.5mm = 1.5"
Note: This product falls under Article 4(3) of Directive 2014/68/EU (Pressure Equipment Directive) and is manufactured in accordance with good engineering practice (GEP). CE marking is not required.
Manufacturer: Craft Hardware, Kreuzeckstr 9a 86163 Augsburg, https://www.crafthardware.de/
⚠️ Safety Information
- Always release the pressure in your vessel before opening the vessel. A separate venting valve is required for this purpose.
- The the pressure relief valve must be rated lower than the maximum pressure rating of your vessel.
- The pressure relief valve must be clean to function properly. If dried beer or sugar gets into the relief valve, it must be cleaned immediately, as this can affect the safe function and opening pressure.