Skip to product information
1 of 2

Sparge Arm Extension Tube

Sparge Arm Extension Tube

Regular price €4,00 EUR
Regular price Sale price €4,00 EUR
Sale Sold out
Tax included. Shipping calculated at checkout.
  • Delivery time: 2-5 Workdays

In stock

Length

SKU:

SKU:TFM20702

No reviews
View full details

Product Description

Do you need a different height for your previously purchased two piece sparge arm? These are the individual lower tubes, sold separately. The price shown is for a single length tube, you can choose the tube length from the dropdown above.

How high should your sparge arm be? I recommend having the outlet a few cm below the surface of the liquid. There are mash volume calculators available on the internet, I've often used this one (in English, see the "Can I mash it" section).

The bottom tubes comes in 5 lengths: 5 cm, 13 cm, 21 cm, 29cm, and 37 cm. All the tubes are inside diameter 15mm, outside diameter 18mm.

The exit height of the sparge arm will depend on your kettle height and whether the arm is installed in the kettle top port or accessory clamp. To assist you in choosing the right length, you can refer to the following table which applies to the range of Craft Hardware kettles and both mounting options. The table shows the liter mark at which the center of the sparge arm exit will be located.

38 L Kettle
Sparge Arm Height Mounted in Kettle Mounted in Clamp
9.5 cm (5 cm tube) 26L 34L
17.5 cm (13 cm tube) 19L 26L
25.5 cm (21 cm tube) 11L 19L
33.5 cm (29 cm tube) X 11L
41.5 cm (37 cm tube) X X

 
57 L Kettle
Sparge Arm Height Mounted in Kettle Mounted in Clamp
9.5 cm (5 cm tube) 42L 52L
17.5 cm (13 cm tube) 32L 42L
25.5 cm (21 cm tube) 22L 32L
33.5 cm (29 cm tube) 12L 22L
41.5 cm (37 cm tube) X 12L

 
83 L Kettle
Sparge Arm Height Mounted in Kettle Mounted in Clamp
9.5 cm (5 cm tube) 63L 76L
17.5 cm (13 cm tube) 50L 63L
25.5 cm (21 cm tube) 37L 50L
33.5 cm (29 cm tube) 25L 37L
41.5 cm (37 cm tube) 12L 25L