Home / Brew Kettles & Systems / Single Kettles / Kettle 83L 5/1 Clearance SaleKettle 83L 5/1420,00 € 357,00 € incl. VAT plus ShippingOur 83L brew kettle with 6 welded Tri Clamp ferrules: 5 at the bottom, 1 at the top. The two ferrules in the back are intended for our 3.2 kW 230V heating elements, one installed crosswise above the other. In the front you can install a dip tube, thermometer, and whirlpool port. The Ferrule on top is mainly intended for our steam condenser. The 5/1 Kettle is typically used as a boil kettle.Lieferzeit: 7-10 Werktage*In stock Kettle 83L 5/1 quantity Add to cart SKU: BKM21674 Category: Single Kettles Tag: 83L KettleZum Merkliste hinzufügenZum Merkliste hinzufügen Question about Product Description Additional information Reviews (0) The 5/1 kettle is intended primarily for boiling, but can also be used as a direct fired mash tun. There are two Tri-Clamp ports for heating elements in the back, one at 5cm and one at 8cm height from the bottom. This allows you to install two 3.2 kW heating elements using separate 230V/16A electrical circuits. If you prefer to boil with a single higher powered single phase or 3 phase 400V element, you can also choose the 3/1 kettle and permanently install one in the kettle wall. I can drill the required hole for you.Optimal DesignAll our kettles are sold with welded Tri Clamp ferrules, marked with a handy metric volume scale, and include a fitted lid. They are induction ready and can also be used on traditional electric stoves or with gas cookers (for gas, I recommend our heat shield).The kettles are made with 1.2mm thick SS304 Stainless steel body and a tri-clad sandwich base. The kettle dimensions feature a height:width ratio of 1.2 which reduces your chance of boil overs compared to the typical 1:1 dimension cookware found in the gastronomy industry.Our kettles have a mirror polish finish. We do our best to protect them during the manufacturing process but please be aware that you may find tool marks around the welded areas. FlexibilityWe want our kettles to easily expand with your changing brewing processes, without expensive upgrades or replacement. That’s why we have designed our standard kettles for flexibility. The standard kettle range starts with 4 Tri Clamp ports. That way you have the option to add a heating element, thermometer, or whirlpool port, either now or in the future.Keeping the ports low on the kettle allows you to use any of our kettles as a mash tun, hot liquor tank, or boil kettle interchangeably. Specification83L Fill Volume45cm diameter, 54cm tallCompatible with induction, gas, and standard electric stovesSix DN40 Tri Clamp ferrules: center 5cm above bottom at 45, 135, 180 and 225 degrees, center 8 cm at 315 degrees, and center 49cm at 135 degrees1.2mm SS304 18/8 1.4301 kettle body5mm tri-clad sandwich bottom composed of: SS430 exterior, heat conductive aluminum plate in between, and SS304 interiorSturdy riveted silicon covered handlesVolume markings with 1L marks beginning at 3LIncludes lidMirror polish finish40-70L batch sizeNote: our kettles use DN 40 Tri Clamp Ferrules. The DN40 ferrule has the largest possible ID of all fittings using 50.4mm clamp. This allows a little more space, which comes in handy with a heating element. They are fully compatible with the US standard 1.5″ Tri Clamp.Weight11,5 kgDimensions40 × 40 × 48 cm ReviewsThere are no reviews yet.Only logged in customers who have purchased this product may leave a review.