BIAB Solo Standard 38L

550,00 

Available from: September

A single kettle 38L Tri-Clamp based BIAB Set for beginners and experts alike.

Out of stock

SKU: BAM22052 Category: Tag:
Zum Merkliste hinzufügen
Zum Merkliste hinzufügen

For beginners and experienced brewers alike! Get started on the right path with the Craft Hardware BIAB Solo brewing set. BIAB is an extremely cost effective way to brew great beer while keeping your system as simple as possible. Just pour in your desired boil volume, heat to mash temperature using the integrated heating element, turn off the heater and insert the brew bag and stir in your milled grain. Close the lid and wait about 60 minutes for the mash to complete (an occasional stir helps things along). Then just pull the bag out and turn the element back on to begin boiling. Add your hops per your recipe schedule, then at the end of the boil let the wort cool naturally or use your preferred chilling method to get to yeast pitching temperature. Drain to your fermenter using the included dip tube and silicone hose. Done!

System Design

This is a complete BIAB system built entirely using Tri-Clamp components. If you’re just getting started, this set ensures your initial investment is money well spent. The 4/1 Kettle leaves room for expansion! You can easily upgrade to a pumped BIAB premium system or grow your system to a 2V or 3V version. The set includes:

  • 1 38L 4/1 Brew Kettle with 5 welded Tri-Clamp ferrules
  • 1 fitted 38L kettle insulation
  • 1 fitted 38L Brew Bag BIAB mash sack
  • 1 heating element
  • 1 3m Connecting cable H07RN-F 3G1,5 with EU Schuko Plug
  • 1 analog Tri-Clamp thermometer
  • 1 quick clean Tri-Clamp valve
  • 1 hose barb fitting
  • 1 Tri-Clamp dip tube
  • 1m reinforced silicone hose
  • 2 Tri-Clamp End caps
  • 7 Tri-Clamp clamps and gaskets
  • 1 BIAB pulley (maximum 8 KG grain)

Batch Size

System efficiency is lower than with our Duo or Trio Systems. For German brewers, the System efficiency measured as “Sudhausausbeute” or SHA is around 52-58%.

The pre-boil volume capacity is 16-33L. Grain capacity is limited by your ability to lift the bag out. The included pulley should not be used for grain bills larger than 8 KG!

Small batch size: you can brew as small as 13L batches of 13P wort. You will want to reduce power to the heating element for very small batches.

Large batch size: You can expect to get up to 25L of 13P wort in the fermenter when boiling for 60 minutes. For higher gravity beers the maximum batch size will decrease. For example at 20P, with a 8KG grain bill, you can expect about 20L in the fermenter. Remember that when using the steam condenser in the kettle wall, you will restrict the boil size to maximum of about 26L.

Notes

The heating element in this set includes a 3m connection cable with SCHUKO male plug, but does not come pre-wired to the element. Please consult a professional electrician. You must be sure to use an appropriate GFI outlet and circuit breaker sized for the load.

In addition the hardware provided with the set, you will probably want to get a hydrometer, and a stirring spoon. These are most likely available wherever you buy your brewing ingredients.

Tri Clamp Size

1 1/2"

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.